北京启维益成科技有限公司 旗下网站

生物耗材网 请登录 | 免费注册 | 联系我们 
  首 页 >> 生物试剂 >> 试剂盒 >> 表观遗传学 >>
【产品名称】
 MethylFlash 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric)
【订购货号】
 E158677
【产品CAS号码】
 无
【规格/价格】
 
【预计到货时间】
 30 天
【产品详细说明】
【本产品仅供科学研究使用】
【更新日期】 2014-2-11  
Product Overview

The MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric) is a complete set of optimized buffers and reagents to colorimetrically quantify 5-formylcytosine (5-fC) in a microplate-based format. It is suitable for use with DNA isolated from any species (mammals, plants, fungi, bacteria, viruses, etc.) in a variety of forms including, but not limited to, cultured cells, fresh and frozen tissues, paraffin-embedded tissues, and body fluid samples. The kit has the following advantages and features:

Fast and easy procedure completed within just 3 hours and 45 minutes. High sensitivity, of which the detection limit can be as low as 1 pg of 5-fC. High specificity with detection of only 5-fC. No cross-reactivity to cytosine, 5-mC, 5-hmC, or 5-caC within the indicated concentration range of the sample DNA. Highly convenient assay that uses DNA isolated from cells or tissues directly; no need for DNA digestion or hydrolysis. Universal positive and negative controls are included, which are suitable for quantifying 5-fC from any species.  Strip-well microplate format makes the assay flexible: manual or high throughput analysis. Simple, reliable, and consistent assay conditions. 

Background Information
5-formylcytosine (5-fC) has recently been found in mammalian tissue and cells and has been classified as a seventh DNA base. It is formed by the oxidation of 5-hydroxymethylcytosine through TET hydroxylases and has been demonstrated to be an intermediate of the DNA demethylation process. The function of 5-fC in gene regulation is not yet entirely clear, but it has been shown that 5-fC exhibits replication-dependent dilution during mouse pre-implantation development and could be functional in regulating pre-implantation development as a whole. The detection of 5-fC in various tissues and cells is important because 5-fC could be a marker to indicate active DNA demethylation. 5-fC can also be directly excised by Thymine DNA glycosylase (TDG) to allow subsequent base excision repair (BER) processing which converts modified cytosine back to its unmodified state.

Several chromatography-based techniques such as HPLC-MS are used for the detection of 5-fC in tissue and cells. However, these methods are time consuming, require large amounts of DNA and have low throughput with high costs. To address these problems, Epigentek offers the MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric), which uses a unique microplate-based procedure to directly quantify 5-fC.

Principle & Procedure
The MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric) contains all the reagents necessary for the quantification of 5-fC. In this assay, DNA is bound to strip-wells that are specifically treated to have a high DNA affinity. 5-fC is detected using capture and detection antibodies. The detected signal is enhanced and then quantified colorimetrically by reading the absorbance in a microplate spectrophotometer at a wavelength of 450 nm. The amount of 5-fC is proportional to the OD intensity measured.

Starting Materials & Input Amount
The detection limit of the input DNA can be as low as 1 pg of 5-fC with a dynamic range from 10 pg to 400 pg (see Fig. 1). There is no cross-reactivity to cytosine, 5-mC, or 5-hmC within the indicated concentration range of the sample DNA (see Fig. 2). 

Safe and Convenient
All the necessary reagents, including negative and positive controls, for the quantification of 5-fC are conveniently packaged in the kit. The direct colorimetric quantification of DNA samples in a 96-well microplate format eliminates the need for DNA digestion/denaturation, radioactivity, extraction, or chromatography.

Easy, Fast, and Flexible
The entire colorimetric assay has easy-to-follow steps for convenience and speed, allowing it to be completed in just 3 hours and 45 minutes. The strip-well microplate format allows for a flexible assay for manual or high throughput analysis. Universal positive and negative controls are included with the kit for the quantification of 5-fC from any species, such as mammals, plants, fungi, bacteria, and viruses.

Responsive, Reliable, and Practical
Based on its working principle and the microplate format, the kit can be practically and routinely used for any species and for a variety of forms including cultured cells, fresh and frozen tissues, and paraffin-embedded tissues. To demonstrate the capabilities of the kit, it has been successfully used for quantifying the content of 5-fC in DNA from human brain tissue, mouse brain tissue, rectal tissue, and rectal cancer. The percentage of 5-fC measured by the kit is parallel and comparable to that detected by LC-MS/MS methods (see Fig. 4).


Fig. 1. Schematic procedure for the MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric). 


Fig. 2. 5-fC standard control was added into the assay wells at different concentrations and then measured with the MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric).


Fig. 3. Demonstration of high specificity of 5-fC detection achieved by the MethylFlash™ 5-Formylcytosine (5-fC) DNA Quantification Kit (Colorimetric). Synthetic unmethylated DNA, methylated DNA, hydroxymethylated DNA and 5-formylcytosine DNA standard were added into the assay wells at different concentrations and then measured with the MethylFlash™ 5-Formylcytosine DNA Quantification Kit (Colorimetric).


Fig. 4. Percentage of 5-fC in different tissues measured with the MethylFlash™ 5-Formylcytosine DNA Quantification Kit (Colorimetric).

Product Components

WB (10X Wash Buffer)
BS (Binding Solution)
NC (Negative Control, 10 µg/ml)*
PC (Positive Control, 5-fC 1 µg/ml)*
CA (Capture Antibody, 1000X)*
DA (Detection Antibody, 2000X)*
ES (Enhancer Solution)*
DS (Developer Solution)
SS (Stop Solution)
8-Well Assay Strips (With Frame)
User Guide

Note: The NC Negative Control I is an oligo containing no 5-fC. The PC Positive Control is a 5-fC oligo and is normalized to have 100% of 5-fC .

* Spin the solution down to the bottom prior to use.

打印此页】 【返回】【顶部】【关闭

【相关产品】